Close#2800
This is an alternative to the `--config-file-path` option. If both `--config-file-path` and `MEILI_CONFIG_FILE_PATH` are present, `--config-file-path` takes precedence according to the "Priority order" section of #2558.
Not sure why but the compiler didn't catch this until clap is upgraded to v4.
Follwoing are the error from 'cargo test':
running 2 tests
test routes::indexes::search::test::test_fix_sort_query_parameters ... ok
test option::test::test_valid_opt ... FAILED
failures:
---- option::test::test_valid_opt stdout ----
thread 'option::test::test_valid_opt' panicked at 'Command meilisearch-http: Argument or group 'import-snapshot' specified in 'requires*' for 'ignore_missing_snapshot' does not exist', /Users/ychou/.cargo/registry/src/github.com-1ecc6299db9ec823/clap-4.0.9/src/builder/debug_asserts.rs:152:13
note: run with environment variable to display a backtrace
failures:
option::test::test_valid_opt
test result: FAILED. 1 passed; 1 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
2839: Update internal CLI documentation r=curquiza a=jeertmans
# Pull Request
## Related issue
Fixes#2810
## What does this PR do?
- Make internal CLI documentation match the online one
## Remarks
- Scope is limited to `meilisearch/meilisearch-http/src/option.rs`, not the flattened structs: should I also take care of them?
- Could not find online docs for `enable_metrics_route`
- Max column width wrapping was done by hand, so may not be perfect
- I removed the links from the internal doc: should I put them back?
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue, or have you listed the changes applied in the PR description (and why they are needed)?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Co-authored-by: Jérome Eertmans <jeertmans@icloud.com>
2841: Bail if config file contains 'config_file_path' r=Kerollmops a=arriven
# Pull Request
## Related issue
Fixes#2801
## What does this PR do?
- Return an error if config file contains 'config_file_path'
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue, or have you listed the changes applied in the PR description (and why they are needed)?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Co-authored-by: arriven <20084245+Arriven@users.noreply.github.com>
2819: Replace a meaningless serde message r=irevoire a=onyxcherry
# Pull Request
## What does this PR do?
Fixes#2680
<!-- Please link the issue you're trying to fix with this PR, if none then please create an issue first. -->
I've renamed the `serde_msg` variable to a `message` as _message_ does or does not include the serde error message --> is more generic.
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: Tomasz Wiśniewski <tomasz@wisniewski.app>
2745: Config file support r=curquiza a=mlemesle
# Pull Request
## What does this PR do?
Fixes#2558
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
2789: Fix typos r=Kerollmops a=kianmeng
# Pull Request
## What does this PR do?
Found via `codespell -L crate,nam,hart`.
## PR checklist
Please check if your PR fulfills the following requirements:
- [ ] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
2814: Skip dashboard test if mini-dashboard feature is disabled r=Kerollmops a=jirutka
Fixes#2813
Fixes the following error:
cargo test --no-default-features
...
error: couldn't read target/debug/build/meilisearch-http-ec029d8c902cf2cb/out/generated.rs: No such file or directory (os error 2)
--> meilisearch-http/tests/dashboard/mod.rs:8:9
|
8 | include!(concat!(env!("OUT_DIR"), "/generated.rs"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
error: could not compile `meilisearch-http` due to previous error
2826: Rename receivedDocumentIds into matchedDocuments r=Kerollmops a=Ugzuzg
# Pull Request
## What does this PR do?
Fixes#2799
Changes DocumentDeletion task details response.
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Tested with curl:
```
curl \
-X POST 'http://localhost:7700/indexes/movies/documents/delete-batch' \
-H 'Content-Type: application/json' \
--data-binary '[
23488,
153738,
437035,
363869
]'
{"taskUid":1,"indexUid":"movies","status":"enqueued","type":"documentDeletion","enqueuedAt":"2022-10-01T20:06:37.105416054Z"}%
curl \
-X GET 'http://localhost:7700/tasks/1'
{"uid":1,"indexUid":"movies","status":"succeeded","type":"documentDeletion","details":{"matchedDocuments":4,"deletedDocuments":2},"duration":"PT0.005708322S","enqueuedAt":"2022-10-01T20:06:37.105416054Z","startedAt":"2022-10-01T20:06:37.115562733Z","finishedAt":"2022-10-01T20:06:37.121271055Z"}
```
Co-authored-by: mlemesle <lemesle.martin@hotmail.fr>
Co-authored-by: Kian-Meng Ang <kianmeng@cpan.org>
Co-authored-by: Jakub Jirutka <jakub@jirutka.cz>
Co-authored-by: Jarasłaŭ Viktorčyk <ugzuzg@gmail.com>
Fixes the following error:
cargo test --no-default-features
...
error: couldn't read target/debug/build/meilisearch-http-ec029d8c902cf2cb/out/generated.rs: No such file or directory (os error 2)
--> meilisearch-http/tests/dashboard/mod.rs:8:9
|
8 | include!(concat!(env!("OUT_DIR"), "/generated.rs"));
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
error: could not compile `meilisearch-http` due to previous error
(Some of) these specialized tokenizations include huge dictionaries
that currently account for 90% (!) of the meilisearch binary size.
This commit adds chinese, hebrew, japanese, and thai feature flags
that are propagated via milli down to the charabia crate. To keep it
backward compatible, they are enabled by default.
Related to meilisearch/milli#632
* Add some tests
* Disallow index creation when API key doesn't havec explicitelly the right on the creating index
* Fix lazy index creation with `indexes.*` action
2504: New README 🌟 r=curquiza a=curquiza
⚠️ Please do not only look at the Markdown but also how the GitHub renders the README 😇👉👉 [Rendered](https://github.com/meilisearch/meilisearch/blob/new-readme/README.md) 👈👈
2697: Accept an environment variable to enable the metrics route r=ManyTheFish a=Kerollmops
With the PR Meilisearch is able to accept the `MEILI_ENABLE_METRICS_ROUTE` environment variable to enable the newly introduces metrics route.
Co-authored-by: Clémentine Urquizar <clementine@meilisearch.com>
Co-authored-by: Clément Renault <clement@meilisearch.com>
2689: Use mimalloc as the global allocator r=Kerollmops a=loiclec
milli has switched its global allocator to mimalloc already, and we have seen some performance gains as a result. Furthermore, we can use mimalloc as the global allocator on all platforms whereas jemalloc was only activated on Linux.
This PR brings mimalloc to Meilisearch as well.
2690: Add LTO and codegen-units=1 to release compile options r=Kerollmops a=loiclec
This PR brings Meilisearch's release compile options in line with milli (see https://github.com/meilisearch/milli/pull/606 ).
Adding LTO and codegen=units=1 will make compile times longer, but they also speed up the final binary significantly.
Co-authored-by: Loïc Lecrenier <loic@meilisearch.com>
2674: Add analytics on the stats routes r=ManyTheFish a=irevoire
# Pull Request
## What does this PR do?
Implements https://github.com/meilisearch/specifications/pull/169
## PR checklist
Please check if your PR fulfills the following requirements:
- [ ] Does this PR fix an existing issue?
- [ ] Have you read the contributing guidelines?
- [ ] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: Irevoire <tamo@meilisearch.com>
2678: Accept either an array of documents or a single document r=irevoire a=Kerollmops
# Pull Request
## What does this PR do?
Fixes#2671
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Co-authored-by: Clément Renault <clement@meilisearch.com>
2664: 🐞 fix: Support https in print_launch_resume r=irevoire a=evpeople
fix#2660
# Pull Request
## What does this PR do?
Fixes#2660
<!-- Please link the issue you're trying to fix with this PR, if none then please create an issue first. -->
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: evpeople <hangcaihui@gmail.com>
2523: Improve the tasks error reporting when processed in batches r=irevoire a=Kerollmops
This fixes#2478 by changing the behavior of the task handler when there is an error in a batch of document addition or update.
What changes is that when there is a user error in a task in a batch we now report this task as failed with the right error message but we continue to process the other tasks. A user error can be when a geo field is invalid, a document id is invalid, or missing.
fixes#2582, #2478
Co-authored-by: Kerollmops <clement@meilisearch.com>
Co-authored-by: ManyTheFish <many@meilisearch.com>
2584: Format API keys in hexa instead of base64 r=curquiza a=ManyTheFish
This PR:
- Changes API key generation and formatting to ease the generation of the key made by our users
- updates the `uuid` crate version
The API key can now be generated in bash as below:
```sh
echo -n $HYPHENATED_UUID | openssl dgst -sha256 -hmac $MASTER_KEY
```
fixes the issue raised in [product/discussion#421](https://github.com/meilisearch/product/discussions/421#discussioncomment-3079410), this should not impact anything in documentation nor integration but ease the key generation on the user sides.
poke `@gmourier`
Co-authored-by: ManyTheFish <many@meilisearch.com>
2525: Auth: Provide all document related permissions for action document.* r=Kerollmops a=janithpet
Added a `Action::DocumentsAll` identifier as [suggested](https://github.com/meilisearch/meilisearch/issues/2080#issuecomment-1022952486), along with the other necessary changes in `action.rs`.
Inside `store.rs`, added an extra condition in `HeedAuthStore::put_api_key` to append all document related permissions if `key.actions.contains(&DocumentsAll)`.
Updated the tests as [suggested](https://github.com/meilisearch/meilisearch/issues/2080#issuecomment-1022952486).
I am quite new to Rust, so please let me know if I had made any mistakes; have I written the code in the most idiomatic/efficient way? I am aware that the way I append the document permissions could create duplicates in the `actions` vector, but I am not sure how fix that in a simple way (other than using other dependencies like [itertools](https://github.com/rust-itertools/itertools), for example).
## What does this PR do?
Fixes#2080
## PR checklist
Please check if your PR fulfills the following requirements:
- [ ] Does this PR fix an existing issue?
- [ x] Have you read the contributing guidelines?
- [ x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: janithPet <jpetangoda@gmail.com>
Some contained settings with the criterion desc(fame), which is invalid
for a v3 or higher dump.
The change took place in the updates.json file inside the decompressed
.dump files. Instances of desc(field) or asc(field) were changed to
field:desc and field:asc
Move `meilisearch_error` to `meilisearch_types::error`
Move `meilisearch_lib::index_resolver::IndexUid` to `meilisearch_types::index_uid`
Add a new `InvalidIndexUid` error in `meilisearch_types::index_uid`
2494: Introduce the new faceting and pagination settings r=ManyTheFish a=Kerollmops
This PR introduces two new settings following the newly created spec https://github.com/meilisearch/specifications/pull/157:
- The `faceting.max_values_per_facet` one describes the maximum number of values (each with a count) associated with a value in a facet distribution query.
- The `pagination.limited_to` one describes the maximum number of documents that a search query can ever return.
Co-authored-by: Kerollmops <clement@meilisearch.com>
2460: Create custom error types for `TaskType`, `TaskStatus`, and `IndexUid` r=Kerollmops a=walterbm
# Pull Request
## What does this PR do?
Fixes#2443 by making the following changes:
- Add custom `TaskTypeError` for `TaskType::from_str`
- Add custom `TaskStatusError` for `TaskStatus::from_str`
- Add custom `IndexUidFormatError` for `IndexUid::from_str`
- Implement `From<IndexUidFormatError> for IndexResolverError` to convert between errors
- Replace all usages of `IndexUid::new` with `IndexUid::from_str`
- **NOTE** I am relatively new to Rust and I struggled a lot with this final part. This PR ended up with a messy error conversion which does not seem ideal. Please let me know if you have any suggestions for how to make this better and I'll be happy to make any updates!
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: walter <walter.beller.morales@gmail.com>
2471: Remove the connection keep-alive timeout r=MarinPostma a=Thearas
# Pull Request
## What does this PR do?
Fixes <https://github.com/meilisearch/meilisearch-go/issues/221>.
Meilisearch has a default connection keep-alive timeout for 5s, which means it will close the connections with idle time >= 5s.
This PR set actix-web keep-alive config to `KeepAlive::Os`, let the client and system to decide when to close the connection.
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Co-authored-by: Thearas <thearas850@gmail.com>
2454: Unify the pagination of the index and documents route behind a common type r=curquiza a=irevoire
`@MarinPostma` wdyt of keeping the `auto_paginate_sized` until we implement the pagination on every route that needs it just to see if it could be useful to something else
Co-authored-by: Tamo <tamo@meilisearch.com>
2447: move index uid in task content r=Kerollmops a=MarinPostma
this pr moves the index_uid from the `Task` to the `TaskContent`. This is because the task can now have content that do not target a particular index.
Co-authored-by: ad hoc <postma.marin@protonmail.com>
2445: Seek-based tasks list r=Kerollmops a=Kerollmops
This PR implements the seek-based pagination for the tasks list following [the spec](https://github.com/meilisearch/specifications/pull/115).
Co-authored-by: Kerollmops <clement@meilisearch.com>
