2313: fix(search): remove the back and forth between the IndexMap and the serde_json::Map r=irevoire a=irevoire
This is ok because we're using the preserve_order feature in serde_json which is already internally using an IndexMap.
See https://github.com/meilisearch/meilisearch/pull/2298#discussion_r845228412_
Co-authored-by: Tamo <tamo@meilisearch.com>
2297: Feat(Search): Enhance formating search results r=ManyTheFish a=ManyTheFish
Add new settings and change crop_len behavior to count words instead of characters.
- [x] `highlightPreTag`
- [x] `highlightPostTag`
- [x] `cropMarker`
- [x] `cropLength` count word instead of chars
- [x] `cropLength` 0 is now considered as no `cropLength`
- [ ] ~smart crop finding the best matches interval~ (postponed)
Partially fixes #2214. (no smart crop)
Co-authored-by: ManyTheFish <many@meilisearch.com>
2207: Fix: avoid embedding the user input into the error response. r=Kerollmops a=CNLHC
# Pull Request
## What does this PR do?
Fix#2107.
The problem is meilisearch embeds the user input to the error message.
The reason for this problem is `milli` throws a `serde_json: Error` whose `Display` implementation will do this embedding.
I tried to solve this problem in this PR by manually implementing the `Display` trait for `DocumentFormatError` instead of deriving automatically.
<!-- Please link the issue you're trying to fix with this PR, if none then please create an issue first. -->
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to Meilisearch!
Co-authored-by: Liu Hancheng <cn_lhc@qq.com>
Co-authored-by: LiuHanCheng <2463765697@qq.com>
2281: Hard limit the number of results returned by a search r=Kerollmops a=Kerollmops
This PR fixes#2133 by hard-limiting the number of results that a search request can return at any time. I would like the guidance of `@MarinPostma` to test that, should I use a mocking test here? Or should I do anything else?
I talked about touching the _nb_hits_ value with `@qdequele` and we concluded that it was not correct to do so.
Could you please confirm that it is the right place to change that?
Co-authored-by: Kerollmops <clement@meilisearch.com>
2244: chore(all): bump milli r=curquiza a=MarinPostma
continues the work initiated by `@psvnlsaikumar` in #2228
Co-authored-by: Sai Kumar <psvnlsaikumar@gmail.com>
2173: chore(all): replace chrono with time r=irevoire a=irevoire
Chrono has been unmaintained for a few month now and there is a CVE on it.
Also I updated all the error messages related to the API key as you can see here: https://github.com/meilisearch/specifications/pull/114fix#2172
Co-authored-by: Irevoire <tamo@meilisearch.com>
2098: feat(dump): Provide the same cli options as the snapshots r=MarinPostma a=irevoire
Add two cli options for the dump:
- `--ignore-missing-dump`
- `--ignore-dump-if-db-exists`
Fix#2087
Co-authored-by: Tamo <tamo@meilisearch.com>
2101: chore(all): update actix-web dependency to 4.0.0-beta.21 r=MarinPostma a=robjtede
# Pull Request
## What does this PR do?
I don't expect any more breaking changes to Actix Web that will affect Meilisearch so bump to latest beta.
Fixes #N/A?
<!-- Please link the issue you're trying to fix with this PR, if none then please create an issue first. -->
## PR checklist
Please check if your PR fulfills the following requirements:
- [ ] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Thank you so much for contributing to MeiliSearch!
Co-authored-by: Rob Ede <robjtede@icloud.com>
2095: feat(error): Update the error message when you have no version file r=MarinPostma a=irevoire
Following this [issue](https://github.com/meilisearch/meilisearch-kubernetes/issues/95) we decided to change the error message from:
```
Version file is missing or the previous MeiliSearch engine version was below 0.24.0. Use a dump to update MeiliSearch.
```
to
```
Version file is missing or the previous MeiliSearch engine version was below 0.25.0. Use a dump to update MeiliSearch.
```
Co-authored-by: Tamo <tamo@meilisearch.com>
2075: Allow payloads with no documents r=irevoire a=MarinPostma
accept addition with 0 documents.
0 bytes payload are still refused, since they are not valid json/jsonlines/csv anyways...
close#1987
Co-authored-by: mpostma <postma.marin@protonmail.com>
2068: chore(http): migrate from structopt to clap3 r=Kerollmops a=MarinPostma
migrate from structopt to clap3
This fix the long lasting issue with flags require a value, such as `--no-analytics` or `--schedule-snapshot`.
All flag arguments now take NO argument, i.e:
`meilisearch --schedule-snapshot true` becomes `meilisearch --schedule-snapshot`
as per https://docs.rs/clap/latest/clap/struct.Arg.html#method.env, the env variable is defines as:
> A false literal is n, no, f, false, off or 0. An absent environment variable will also be considered as false. Anything else will considered as true.
`@gmourier`
`@curquiza`
`@meilisearch/docs-team`
Co-authored-by: mpostma <postma.marin@protonmail.com>
2057: fix(dump): Uncompress the dump IN the data.ms r=irevoire a=irevoire
When loading a dump with docker, we had two problems.
After creating a tempdirectory, uncompressing and re-indexing the dump:
1. We try to `move` the new “data.ms” onto the currently present
one. The problem is that if the `data.ms` is a mount point because
that's what peoples do with docker usually. We can't override
a mount point, and thus we were throwing an error.
2. The tempdir is created in `/tmp`, which is usually quite small AND may not
be on the same partition as the `data.ms`. This means when we tried to move
the dump over the `data.ms`, it was also failing because we can't move data
between two partitions.
------------------
1 was fixed by deleting the *content* of the `data.ms` and moving the *content*
of the tempdir *inside* the `data.ms`. If someone tries to create volumes inside
the `data.ms` that's his problem, not ours.
2 was fixed by creating the tempdir *inside* of the `data.ms`. If a user mounted
its `data.ms` on a large partition, there is no reason he could not load a big
dump because his `/tmp` was too small. This solves the issue; now the dump is
extracted and indexed on the same partition the `data.ms` will lay.
fix#1833
Co-authored-by: Tamo <tamo@meilisearch.com>
When loading a dump with docker, we had two problems.
After creating a tempdirectory, uncompressing and re-indexing the dump:
1. We try to `move` the new “data.ms” onto the currently present
one. The problem is that if the `data.ms` is a mount point because
that's what peoples do with docker usually. We can't override
a mount point, and thus we were throwing an error.
2. The tempdir is created in `/tmp`, which is usually quite small AND may not
be on the same partition as the `data.ms`. This means when we tried to move
the dump over the `data.ms`, it was also failing because we can't move data
between two partitions.
==============
1 was fixed by deleting the *content* of the `data.ms` and moving the *content*
of the tempdir *inside* the `data.ms`. If someone tries to create volumes inside
the `data.ms` that's his problem, not ours.
2 was fixed by creating the tempdir *inside* of the `data.ms`. If a user mounted
its `data.ms` on a large partition, there is no reason he could not load a big
dump because his `/tmp` was too small. This solves the issue; now the dump is
extracted and indexed on the same partition the `data.ms` will lay.
fix#1833
2008: bug(lib): fix get dumps bad error code r=curquiza a=MarinPostma
fix bad error code being returned whet getting a dump status, and add a test
close#1994
Co-authored-by: Marin Postma <postma.marin@protonmail.com>
- Add API keys in snapshots
- Add API keys in dumps
- Rename action indexes.add to indexes.create
- fix QA #1979fix#1979fix#1995fix#2001fix#2003
related to #1890
1965: Reintroduce engine version file r=MarinPostma a=irevoire
Right now if you boot up MeiliSearch and point it to a DB directory created with a previous version of MeiliSearch the existing indexes will be deleted. This [used to be](51d7c84e73) prevented by a startup check which would compare the current engine version vs what was stored in the DB directory's version file, but this functionality seems to have been lost after a few refactorings of the code.
In order to go back to the old behavior we'll need to reintroduce the `VERSION` file that used to be present; I considered reusing the `metadata.json` file used in the dumps feature, but this seemed like the simpler and more approach. As the intent is just to restore functionality, the implementation is quite basic. I imagine that in the future we could build on this and do things like compatibility across major/minor versions and even migrating between formats.
This PR was made thanks to `@mbStavola` and is basically a port of his PR #1860 after a big refacto of the code #1796.
Closes#1840
Co-authored-by: Matt Stavola <m.freitas@offensive-security.com>
Right now if you boot up MeiliSearch and point it to a DB directory created with a previous version of MeiliSearch the existing indexes will be deleted. This used to be prevented by a startup check which would compare the current engine version vs what was stored in the DB directory's version file, but this functionality seems to have been lost after a few refactorings of the code.
In order to go back to the old behavior we'll need to reintroduce the VERSION file that used to be present; I considered reusing the metadata.json file used in the dumps feature, but this seemed like the simpler and more approach. As the intent is just to restore functionality, the implementation is quite basic. I imagine that in the future we could build on this and do things like compatibility across major/minor versions and even migrating between formats.
This PR was made thanks to @mbStavola
Closes#1840
implements:
https://github.com/meilisearch/specifications/blob/develop/text/0085-api-keys.md
- Add tests on API keys management route (meilisearch-http/tests/auth/api_keys.rs)
- Add tests checking authorizations on each meilisearch routes (meilisearch-http/tests/auth/authorization.rs)
- Implement API keys management routes (meilisearch-http/src/routes/api_key.rs)
- Create module to manage API keys and authorizations (meilisearch-auth)
- Reimplement GuardedData to extend authorizations (meilisearch-http/src/extractors/authentication/mod.rs)
- Change X-MEILI-API-KEY by Authorization Bearer (meilisearch-http/src/extractors/authentication/mod.rs)
- Change meilisearch routes to fit to the new authorization feature (meilisearch-http/src/routes/)
- close#1867
1893: Make matches work with numerical value r=MarinPostma a=Thearas
# Pull Request
## What does this PR do?
Implement #1883.
I have test this PR with unit test. It appears to be working properly:
PTAL `@curquiza`
## PR checklist
Please check if your PR fulfills the following requirements:
- [x] Does this PR fix an existing issue?
- [x] Have you read the contributing guidelines?
- [x] Have you made sure that the title is accurate and descriptive of the changes?
Co-authored-by: Thearas <thearas850@gmail.com>
1813: Apply highlight tags on numbers in the formatted search result output r=irevoire a=Jhnbrn90
This is my first ever Rust related PR.
As described in #1758, I've attempted to highlighting numbers correctly under the `_formatted` key.
Additionally, I added a test which should assert appropriate highlighting.
I'm open to suggestions and improvements.
Co-authored-by: John Braun <john@brn.email>
